5kW Poolex Nano Pool Heat Pump UK Plug & Play (Wi-Fi) - Cosmetic Casing Damage (Warranty Not Affected)
Clearance Unit – Cosmetic Casing Damage
This is a one-off clearance Poolex Nano 5kW sold at a reduced price because of cosmetic damage to the casing. The outer plastic protective grille is bent on one corner and there is some minor flattening to the aluminium fins behind it (see the photos, which are of the actual unit you will receive).
The damage is cosmetic only. The unit has been fully tested and works exactly as it should. It does not affect how the heat pump runs, and the full manufacturer warranty still applies (2 years on the unit, 5 years compressor, 15 years titanium heat exchanger), exactly the same as a brand new one.
You are getting a fully working, full-warranty Poolex Nano 5kW for less, simply because it is not perfect to look at. Once it is plumbed in beside the pool you would never know. Only one available.
Poolex Nano 5kW — UK Plug & Play, Wi-Fi Connected
The Poolex Nano 5kW is one of the most compact heat pumps you can buy for an above-ground pool. It plugs into a standard UK 13A socket (proper UK plug fitted, no adaptors needed), connects to your existing 32mm or 38mm pool hose, and you're heating in minutes. No electrician, no extra wiring.
Who it's for
- Above-ground pools up to roughly 30m³ (30,000 litres)
- Frame pools (Intex, Bestway and similar) and rigid above-ground pools
- Anyone who wants a tidy, quiet unit that doesn't dominate the patio
Why this one
- UK plug fitted with built-in RCD safety plug. Truly plug and play.
- Wi-Fi built in. Set the temperature, schedule, and check on it from the Poolex app on your phone (2.4GHz network required).
- Whisper quiet. Under 30dBA at 10m, so it won't ruin a Sunday afternoon.
- COP up to 5.4. You get around 5.4kW of heat for every 1kW of electricity you put in, so running costs stay sensible.
- Titanium heat exchanger. Happy with chlorine and salt pools.
- Auto defrost so it keeps working in cooler UK shoulder-season weather.
- Heating and cooling modes built in.
What's in the box
- Poolex Nano 5kW heat pump
- UK 13A mains lead with pre-fitted RCD safety plug
- Hose adaptors for 32mm and 38mm
- Instruction manual
Tech specs
- Max heating capacity (A26/W26): 5.0kW
- COP (A26/W26): 5.4
- Max heating capacity (A15/W26): 3.36kW
- COP (A15/W26): 4.16
- Max power input: 1.75kW
- Voltage: 230V, plugs into a standard UK 13A socket
- Refrigerant: R32
- Noise: under 30dBA at 10m
- Water connections: 32mm (38mm adaptor included)
- Nominal flow: 1.4m³/h
- Dimensions (L x W x H): 440 x 400 x 390mm
- Weight: 32kg
- Wi-Fi: 2.4GHz, Poolex app
Warranty
2 years on the unit, plus extended cover on the key components: 5 years on the compressor and 15 years on the titanium heat exchanger.
🛒 Extras You May Need
| 2" to 1.25" Threaded Adaptor Pair | The Nano connects with a 1.25" (32mm) thread, so if you want to run 2" (50mm) nut-type hose from a sand filter system you'll need this pair of reducers. Comes as a set of two so you have one for the inlet and one for the outlet. You need 1 pair per heat pump. |
Downloads
Recommended for You
Your Product Browsing History
Best Sellers
- Choosing a selection results in a full page refresh.