Frequently Bought Together
Total price:
- Sale price
- £94.99
- Regular price
- £109.99
10kW Flotide Swimming Pool Heat Pump UK Plug & Play (S7)
The Sweet Spot — Great for Most UK Pools
The Flotide S7 hits the perfect balance of power and value for most UK pool owners. It comes with a UK 13A plug already attached — no electrician, no wiring, no fuss. Just connect to your filtration system, plug in, and enjoy warm pool water within hours.
🎯 Perfect For
- Above-ground pools up to 40,000 litres (40m³)
- In-ground pools up to 40m³ with good insulation
- Frame pools (Intex, Bestway, etc.) 15ft–18ft round or equivalent rectangular
- Seasonal use from April to October (operates down to -7°C ambient)
Suitable for all pool types — in-ground, above-ground, steel wall, liner, frame pools, and wooden pools.
💷 Running Costs — Exposed
Unlike gas or electric heaters, the Flotide S7 delivers up to 6.79kW of heat for every 1kW of electricity consumed (COP 6.79). That's over 80% free energy extracted from the air!
What does it actually cost to run?
- Power input: 1.15–1.65kW depending on air temperature
- At 21p per kWh, that's approximately 24p–35p per hour when the compressor is running
- Over an 8-hour period: approximately £1.93–£2.77
Lower end at 15°C ambient (spring/autumn), higher end at 27°C ambient (summer). Based on 21p/kWh. Actual costs depend on your tariff, outside air temperature, and pool temperature.
🌡️ Smart Thermostat Operation
The Flotide S7 works just like a thermostat. Set your desired pool temperature and the heat pump does the rest:
- The heat pump heats your pool water to your target temperature
- Once reached, the compressor shuts off automatically
- When the water drops 2°C below your target, it kicks back in
This means your heat pump is not running 24/7 — it cycles on and off as needed to maintain your perfect temperature. Once your pool is up to temperature, running costs drop significantly as it only needs to top up heat lost overnight or on cooler days.
🔧 Simple Setup — True Plug & Play
No electrical wiring required. The Flotide S7 comes with a UK 13A plug already attached — genuine plug and play. Just follow this simple plumbing setup:
Pool (water out) → Pump / Filter → Heat Pump → Pool (water in)
- Position the heat pump near your filtration system (allow 50cm airflow clearance around the unit)
- Connect the inlet pipe from your pump/filter outlet to the heat pump
- Connect the outlet pipe from the heat pump back to your pool return
- Plug into a standard UK 13A socket
- Set your desired temperature — done!
📦 What's Included
- Flotide S7 10kW heat pump unit
- UK 13A plug — already attached, ready to go
- Digital temperature controller
- Water connections (you may need adaptors to suit your connections, see below)
- User manual & warranty documentation
🛡️ Technical Specifications
| Maximum Capacity | 10kW |
| Heating Capacity | 7.81kW (at A15/W13-15) |
| Max Heating Capacity | 10.00kW (at A27/W27) |
| Power Input | 1.15kW (max 2.29kW) |
| COP (Efficiency) | 6.79 (at A15/W13) / 6.08 (at A27/W27) |
| Pool Volume | Up to 40,000 litres (40m³) |
| Noise Level | 37dB / <47dB at 1m / <28dB at 10m |
| Refrigerant | R32 (eco-friendly, low GWP) |
| Water Flow | 4.8m³/h |
| Water Connection | G1-1/2" |
| Dimensions | 913 × 367 × 718mm (W × D × H) |
| Weight | 47kg |
| Max Current | 10.49A (standard UK 13A socket compatible) |
| Power Supply | 220–240V / 1Ph / 50Hz |
| Operating Range | -7°C to 43°C ambient |
| Compressor | GMCC Rotary |
⚠️ Seasonal Use Recommended
This model is designed for extended season use (April–October) in the UK. For year-round heating, consider our premium inverter range.
🛒 Extras You May Need
| Bypass Kit | Lets you divert water around the heat pump when it's not in use. Makes seasonal removal easy and protects the unit over winter. Highly recommended. |
| 32/38mm Hose Tail Adaptor | For standard 32mm or 38mm push-fit hoses (the smooth hoses that come with most above-ground pools). Push on and secure with a jubilee clip. You need 2 per heat pump. |
| 2" Threaded Adaptor | For 2" (50mm) nut-type threaded hoses (typically used with sand filter systems). Screws on with a threaded nut fitting. You need 2 per heat pump. |
🔗 Need Extra Hose?
| 32mm Pool Hose | Standard 32mm push-fit hose with cuffs. Works with the 32/38mm hose tail adaptor. |
| 38mm Pool Hose | Standard 38mm push-fit hose with cuffs. Works with the 32/38mm hose tail adaptor. |
| 2" Threaded Hose (150cm) | 2" hose with nut-type threaded fitting. Works with the 2" threaded adaptor. |
🛡️ Warranty
- 2 years on the heat pump unit
- 5 years on the compressor and heat exchanger
📄 Documentation
Download Full Technical Datasheet (PDF)
Download Installation & Operation Manual (PDF)
❓ Need Help Sizing?
Not sure if this is the right heat pump for your pool? Contact our team — we'll help you choose the perfect size based on your pool volume, location, and usage pattern.
🚚 Free UK Mainland Delivery • 💬 Expert Advice Available • 🔄 30-Day Returns
Heating Output: Up to 10kW (varies with ambient temperature — refer to nameplate and product manual for full performance data)
Performance by Condition
| Outside Air Temp | Water Temp | Heating Output |
|---|---|---|
| 27°C | 27°C | Up to 10kW |
| 24°C | 26°C | Up to 8.6kW |
| 20°C | 26°C | Up to 7.9kW |
| 15°C | 13°C | Up to 7.8kW |
Heat pump output naturally varies with weather conditions. Higher air temperatures deliver greater heating performance — during the UK pool season (May–Sept), your heat pump will typically operate at or near maximum output.
Recommended for You
Your Product Browsing History
Best Sellers
- Choosing a selection results in a full page refresh.