Flotide Inverter 9 UK Plug & Play Pool Heat Pump 9kW | Pools 25-45m³ | R32 Eco-Friendly

The Plug & Play Pool Heat Pump - Just Plug It In and Swim

The Flotide Inver 9 Full Inverter Pool Heat Pump is the easiest way to heat a small to medium pool. Built for pools between 25-45m³, it ships with a fitted UK 13A plug, so there's no need for an electrician to wire in a dedicated circuit - plug it into any suitable outdoor-rated socket and you're heating.

🔌 UK Plug & Play | 🏷️ Energy Rating: A | FREE DELIVERY across the UK on all orders.

🔌 What "Plug & Play" Means For You

• Fitted UK 13A plug: arrives ready to plug into a standard outdoor 13A socket - no hardwiring, no dedicated circuit, no electrician fee for the power side
• 6.7A peak current draw: well within the 13A plug capacity, so it runs reliably from a domestic supply
• DIY-friendly setup: the only specialist work needed is the pipework into your pool filter loop - everything else is plug-it-in-and-go
• Move it if you need to: easy to unplug and relocate at end of season or if you change your pool layout

🏊 Perfect For

• Pool Size: 25-45 cubic metres (ideal for small to medium residential pools)
• Pool Dimensions: Typically 7m x 3.5m up to 9m x 4.5m pools
• Water Volume: 25,000 - 45,000 litres
• Applications: Domestic swimming pools, chlorine or saltwater systems
• Note: Maximum pool volume depends on environmental conditions and desired temperature

✨ Key Features & Benefits

Smart Inverter Technology

The full inverter compressor automatically adjusts heating capacity to suit weather conditions. This means faster heating when you need it, and gentle, efficient operation once your target temperature is reached - cutting energy bills by up to 30% compared to non-inverter models.

"All Seasons" Operation

Works in ambient temperatures down to -7°C, so you can extend your swimming season well into autumn and start earlier in spring. Automatic defrost keeps the unit running efficiently even in cold snaps.

Automatic Heating & Cooling

Not just a heater - the Inver 9 can also cool your pool water in the height of summer. Automatic mode maintains your target temperature year-round without manual intervention.

Eco-Friendly R32 Refrigerant

Uses R32 refrigerant, which has a Global Warming Potential (GWP) 3x lower than older R410A gas. Powerful heating performance while doing your bit for the environment.

Outstanding Energy Efficiency

With a COP (Coefficient of Performance) of up to 10.0 at optimal conditions, the Inver 9 delivers up to £10.00 worth of heat for every £1 of electricity consumed. Even in cooler UK weather (15°C air temperature), it maintains an impressive COP of 6.0.

Titanium Heat Exchanger

The PVC-titanium heat exchanger is built to last, offering superior corrosion resistance for both chlorine and salt chlorinated pools. Reliable, worry-free operation for years to come.

Whisper-Quiet Operation

Low noise rotary compressor combined with a variable speed fan motor keeps noise levels down to 38 dB(A) at silent mode, so you can enjoy peaceful relaxation poolside.

Easy Control & Built-in Wi-Fi

Intuitive glass touch display makes temperature control simple. The Wi-Fi module is included as standard, so you can monitor and adjust your pool temperature from your smartphone wherever you are.

Durable ABS Cabinet

The robust ABS plastic cabinet resists UV damage, corrosion and weathering - built to withstand the British climate year after year.

📊 Full Technical Specifications

💰 Estimated Running Costs

Based on average UK electricity rates (£0.25/kWh) and typical usage:

• Daily running cost (8 hours): Approximately £1.50 - £3.00 depending on ambient temperature and target pool temperature
• Monthly cost (April - September): Approximately £45 - £90
• Annual savings vs electric heater: Up to £600 - £950

Note: Actual costs will vary based on your pool size, desired temperature, ambient conditions, and energy tariff. Using a pool cover can reduce running costs by up to 50%.

📦 What's in the Box

• 1 x Flotide Inver 9/32 Full Inverter Heat Pump
• 1 x Fitted UK 13A plug (factory-installed on the power lead)
• 1 x Winter cover
• 1 x Wi-Fi module (included as standard)
• Installation manual (English)
• Technical specifications datasheet
• Warranty documentation

🔧 Installation Notes

DIY-friendly power, professional pipework recommended. Because the unit ships with a fitted UK 13A plug, the electrical side is plug-and-play - no electrician needed for power. For best results, a qualified pool technician should still handle the pipework. Key requirements:

• A suitable outdoor-rated 13A socket (RCD-protected, weatherproof IP-rated enclosure)
• Outdoor installation with minimum 500mm clearance on all sides for adequate airflow
• Level, vibration-free base (paving slab or concrete pad recommended)
• Connection to pool filtration system via 50mm (2") pipework
• Bypass valve installation recommended for optimal flow control
• Position away from bedroom windows to minimise any noise disturbance

🛡️ Warranty Information

• 2-year warranty on the heat pump unit (parts and labour for manufacturing defects)
• 5-year warranty on compressor and heat exchanger

Warranty is subject to correct installation and proper maintenance according to manufacturer guidelines. Extended warranty options may be available - please contact us for details.

🚚 Delivery & Returns

FREE DELIVERY to mainland UK addresses. Most orders are dispatched within 3-5 working days. This item is eligible for our 14-day returns policy (conditions apply - unit must be unopened and unused).

📥 Technical Downloads

• 📘 Installation & User Manual (PDF)

🌟 Why Choose 123 Pools?

• ✅ FREE DELIVERY across the UK
• ✅ Expert technical support from qualified pool engineers
• ✅ Genuine manufacturer warranties
• ✅ Competitive pricing
• ✅ Fast dispatch

Ready for the easiest pool heating upgrade you'll make this year? Order your Flotide Inverter 9 UK Plug & Play Heat Pump today - no electrician required, just plug it in and swim.

Questions? Our expert team is here to help - call us or use the live chat.