5kW Poolex Nano Pool Heat Pump UK Plug & Play (Wi-Fi) with app
Poolex Nano 5kW — UK Plug & Play, Wi-Fi Connected
The Poolex Nano 5kW is one of the most compact heat pumps you can buy for an above-ground pool. It plugs into a standard UK 13A socket (proper UK plug fitted, no adaptors needed), connects to your existing 32mm or 38mm pool hose, and you're heating in minutes. No electrician, no extra wiring.
Who it's for
- Above-ground pools up to roughly 30m³ (30,000 litres)
- Frame pools (Intex, Bestway and similar) and rigid above-ground pools
- Anyone who wants a tidy, quiet unit that doesn't dominate the patio
Why this one
- UK plug fitted with built-in RCD safety plug. Truly plug and play.
- Wi-Fi built in. Set the temperature, schedule, and check on it from the Poolex app on your phone (2.4GHz network required).
- Whisper quiet. Under 30dBA at 10m, so it won't ruin a Sunday afternoon.
- COP up to 5.4. You get around 5.4kW of heat for every 1kW of electricity you put in, so running costs stay sensible.
- Titanium heat exchanger. Happy with chlorine and salt pools.
- Auto defrost so it keeps working in cooler UK shoulder-season weather.
- Heating and cooling modes built in.
What's in the box
- Poolex Nano 5kW heat pump
- UK 13A mains lead with pre-fitted RCD safety plug
- Hose adaptors for 32mm and 38mm
- Instruction manual
Tech specs
- Max heating capacity (A26/W26): 5.0kW
- COP (A26/W26): 5.4
- Max heating capacity (A15/W26): 3.36kW
- COP (A15/W26): 4.16
- Max power input: 1.75kW
- Voltage: 230V, plugs into a standard UK 13A socket
- Refrigerant: R32
- Noise: under 30dBA at 10m
- Water connections: 32mm (38mm adaptor included)
- Nominal flow: 1.4m³/h
- Dimensions (L x W x H): 440 x 400 x 390mm
- Weight: 32kg
- Wi-Fi: 2.4GHz, Poolex app
Warranty
2 years on the unit, plus extended cover on the key components: 5 years on the compressor and 15 years on the titanium heat exchanger.
🛒 Extras You May Need
| 2" to 1.25" Threaded Adaptor Pair | The Nano connects with a 1.25" (32mm) thread, so if you want to run 2" (50mm) nut-type hose from a sand filter system you'll need this pair of reducers. Comes as a set of two so you have one for the inlet and one for the outlet. You need 1 pair per heat pump. |
🔗 Need Extra Hose?
| 32mm Pool Hose | Standard 32mm push-fit hose with cuffs. Works with the 32/38mm hose tail adaptor. |
| 38mm Pool Hose | Standard 38mm push-fit hose with cuffs. Works with the 32/38mm hose tail adaptor. |
| 2" Threaded Hose (150cm) | 2" hose with nut-type threaded fitting. Works with the 2" threaded adaptor. |
Downloads
Recommended for You
Your Product Browsing History
Best Sellers
- Choosing a selection results in a full page refresh.