Flotide Heat Pump Hose Adaptor — 1.5" to 2" Thread (S, A, X, SX Range)

Connect Standard Pool Hoses to Your Flotide Heat Pump

This adaptor screws directly into the inlet or outlet port of any Flotide S, A, X, or SX range heat pump, converting the G1-1/2" (1.5") threaded connection to accept standard 2" (50mm) nut-type threaded pool hoses.

In plain English: Your Flotide heat pump has 1.5" threaded ports. Most pool hoses (like the ones that come with sand filters and Intex/Bestway pools) use 2" nut fittings. This adaptor bridges the gap — screw it in, connect your hose, done.

🎯 You Need This If

• You have a Flotide S5, S7, S10, A5, A7, A10, X11, X14 or any SX model
• Your pool hoses have 2" (50mm) threaded nut fittings
• You're connecting to a sand filter pump with standard 38mm/50mm hoses
• You want a watertight, secure connection without bodge adapters

🔧 How It Works

1. Screw the adaptor into your Flotide heat pump's inlet or outlet port (1.5" male thread → heat pump)
2. Connect your 2" threaded hose to the other end of the adaptor
3. Hand-tighten — use PTFE tape for a watertight seal
4. Repeat for both inlet and outlet (you'll need 2 adaptors per heat pump)

🔗 Works With

This adaptor pairs perfectly with our 2" Threaded Pool Hose (150cm) — the standard hose used with most above-ground pool setups and sand filter systems.

⚠️ How Many Do I Need?

You need 2 adaptors per heat pump — one for the water inlet and one for the water outlet. Add 2 to your basket!

🛡️ Specifications

🚚 Free UK Mainland Delivery • 💬 Expert Advice Available