The Biggest Single-Phase Heat Pump in the Flotide Range
The Flotide Inverter 25 is the single-phase version of our Inverter 25T. It uses the same cabinet, suits the same 60-115m³ pools and delivers up to 24.0kW of heating capacity, but it runs on a normal 230V single-phase supply, so you don't need a 3-phase upgrade. Peak COP is 13.0, so for every £1 of electricity you put in you get up to £13 worth of heat back into the pool. A good fit for large domestic pools, holiday lets and light commercial sites.
🏷️ Energy Rating: A | 📡 Wi-Fi Module Included | 🔌 Single-Phase 230V Supply | FREE DELIVERY across the UK on all orders.
⚡ Important: Dedicated Hardwired Supply Required
Single-phase doesn't mean small. The Inverter 25 has a rated current of 22.5A and a minimum fuse rating of 35A (Flotide datasheet), so it must be hardwired on its own dedicated circuit by a qualified electrician. Flotide's manual calls for a 30mA RCD that trips in under 0.1 seconds, and your electrician should size the cable and breaker from the unit's nameplate using the cable table in the manual. It's worth having them check your incoming supply can take the extra load alongside the rest of the property. Got 3-phase on site? See the Flotide Inverter 25T 3-Phase instead.
🏊 Perfect For
-
Pool Size: 60-115 cubic metres (large residential and light commercial pools)
-
Water Volume: 60,000 - 115,000 litres
-
Applications: Large domestic pools, holiday lets, small hotels and wellness centres, chlorine or saltwater systems
-
Note: Maximum pool volume depends on environmental conditions and desired temperature
✨ Key Features & Benefits
Smart Inverter Modulation
The full inverter compressor automatically adjusts heating capacity to suit the weather and the pool's demand. It modulates all the way from 4.7kW up to 24.0kW, which is a much lower floor than the 25T (9.8kW), so once the pool is up to temperature it can tick over gently instead of cycling on and off.
Outstanding Energy Efficiency
With a COP (Coefficient of Performance) of up to 13.0 at A27°C/W27°C, the Inverter 25 delivers up to £13 worth of heat for every £1 of electricity consumed. In cooler UK weather (15°C air temperature) it still manages a COP of up to 7.2.
Gree Inverter Compressor
Built around a low-noise Gree rotary inverter compressor paired with a variable speed fan motor, the same compressor brand used across the single-phase Flotide Inverter range.
"All Seasons" Operation
Works in ambient temperatures down to -7°C, so you can extend the swimming season into autumn and start earlier in spring. Automatic defrost keeps the unit running efficiently in cold snaps.
Automatic Heating & Cooling
Not just a heater - the Inverter 25 can also cool the pool in summer if needed. Automatic mode maintains your target temperature without manual intervention.
Eco-Friendly R32 Refrigerant
Uses R32 refrigerant, with a Global Warming Potential (GWP) 3x lower than older R410A. Powerful heating performance with reduced environmental impact.
Titanium Heat Exchanger
The PVC-titanium heat exchanger gives excellent corrosion resistance for both chlorine and salt chlorinated pools.
Quiet Operation
Low-noise rotary compressor and variable speed fan keep noise to 45-56 dB(A) at 1m, dropping to 25-46 dB(A) at 10m.
Wi-Fi Control Included
Wi-Fi module supplied as standard. Glass touch display on the unit plus smartphone control, so you can check and adjust the pool temperature from anywhere.
SmartGrid Technology
Built-in SmartGrid input lets external signals influence electricity usage - useful if you have solar PV or want to schedule around an off-peak tariff.
Durable ABS Cabinet
Black ABS cabinet built for outdoor use, with a built-in pressure gauge for an at-a-glance system check. A winter cover is included.
📊 Full Technical Specifications
| Model |
Flotide Inver 25/32 (Part No. 7042941) |
| Energy Label |
A |
| Recommended Pool Volume |
60-115 cubic metres |
| Heating Capacity (A27°C/W27°C) |
24.0 ~ 4.7 kW |
| Heating Capacity (A15°C/W25°C) |
18.5 ~ 4.4 kW |
| Heating Capacity (A10°C/W25°C) |
15.81 ~ 3.75 kW |
| Heating Capacity (A5°C/W25°C) |
12.0 ~ 3.0 kW |
| COP (A27°C/W27°C) |
13.0 ~ 6.0 |
| COP (A15°C/W25°C) |
7.2 ~ 4.6 |
| COP (A10°C/W25°C) |
5.2 ~ 4.08 |
| Power Input (max-min) |
4.96 ~ 0.7 kW |
| Rated Current |
22.5 A |
| Minimum Fuse Rating |
35 A |
| Power Supply |
220-240V / 50Hz / Single Phase (hardwired install) |
| Refrigerant Type |
R32 (1.15 kg charge, 0.78 Ton CO2 equivalent) |
| Compressor |
Gree rotary, variable speed |
| Heat Exchanger Material |
PVC Titanium (corrosion resistant) |
| Cabinet Material |
ABS, black |
| Control Panel |
Glass touch display |
| Wi-Fi |
Included (module supplied as standard) |
| SmartGrid |
Yes |
| Pressure Gauge |
Yes (built-in) |
| Recommended Flow Rate |
14 m³/h |
| Fan Speed |
400 ~ 800 RPM |
| Fan Power |
150 W |
| Noise Level (1m) |
45 - 56 dB(A) |
| Noise Level (10m) |
25 - 46 dB(A) |
| Pipe Connections |
50mm |
| Net Weight |
69 kg |
| Shipping Weight |
103 kg |
| Net Dimensions (L x W x H) |
1160 x 490 x 862 mm |
| Water Temperature Range |
9°C to 40°C |
| Operating Ambient Range |
-7°C to 43°C |
📋 Flotide Inverter range datasheet (PDF) | 📘 Installation and user manual (PDF)
💰 Estimated Running Costs
Worked out from the 0.7 - 4.96 kW power input on Flotide's datasheet, at an average UK electricity rate of £0.25/kWh:
-
8 hours at minimum output: about £1.40
-
8 hours flat out: about £9.92
It sits near the top figure mainly while heating the pool up from cold. Once you're at temperature the inverter modulates down, so day-to-day costs are usually well below it.
Note: Actual costs will vary based on pool size, target temperature, ambient conditions, energy tariff and operating hours. A pool cover can reduce running costs by up to 50%.
📦 What's in the Box
- 1 x Flotide Inver 25/32 Single-Phase Inverter Heat Pump (69 kg)
- 1 x Wi-Fi module
- 1 x Winter cover
- Installation and user manual (English)
🔧 Installation Notes
Professional installation required. This is a hardwired unit and must be installed by a qualified electrician, alongside a qualified pool technician for the pipework. Key requirements from Flotide's manual and datasheet:
- Dedicated 220-240V single-phase supply, 35A minimum fuse rating, with a 30mA RCD (trip time under 0.1 seconds)
- Outdoor installation with plenty of fresh air. Keep at least 2.5m clear in front of the fan outlet, 500mm behind the air inlet and 300-700mm at the sides (see the siting diagram in the manual). Don't box it in or tuck it behind shrubs
- Normally installed within 7.5m of the pool to keep pipe heat loss down
- Level, stable base sized for the 1160 x 490 mm footprint
- Connection to the pool filtration system via 50mm pipework with a bypass
- Recommended flow rate 14 m³/h - check your pool pump can support this
🛡️ Warranty Information
-
2-year warranty on the heat pump unit
-
5-year warranty on the compressor and titanium heat exchanger
Warranty is subject to correct installation by a qualified professional and proper maintenance according to manufacturer guidelines. Extended warranty options may be available - please contact us for details.
🚚 Delivery & Returns
FREE DELIVERY to mainland UK addresses. Most orders are dispatched within 5-7 working days for this unit. This item is eligible for our 14-day returns policy (conditions apply - unit must be unopened and unused).
🌟 Why Choose 123 Pools?
- ✅ FREE DELIVERY across the UK
- ✅ Expert technical support from qualified pool engineers
- ✅ Genuine manufacturer warranties
- ✅ Competitive pricing
- ✅ Volume / trade enquiries welcome
Big pool, no 3-phase? The Flotide Inverter 25 gives you 24kW of inverter heating on a standard single-phase supply. Order today, or call us to talk through your install.
Questions? Our expert team is here to help - call us or use the live chat.