Intex C1000 Krystal Clear Cartridge Filter Pump 1000 GPH (UK Plug)

Keep your above-ground pool water clean, clear and circulating with the Intex C1000 Krystal Clear Cartridge Filter Pump. Genuine Intex, supplied with a UK plug, ready to plug in and run straight out of the box.

The C1000 is the right size for inflatable and metal-frame pools up to 18ft across, including most Intex Easy Set, Intex Metal Frame and Bestway round above-ground pools that use 32mm (1.25") push-on hose fittings.

What you get

• 1 x Intex C1000 Krystal Clear filter pump (model 28638)
• 1 x Type A filter cartridge fitted
• 2 x 32mm (1.25") flexible push-on hoses
• Water inlet fitting with jet and return suction fitting
• UK 3-pin plug

Key features

• 1000 GPH flow rate (3,785 litres per hour)
• Suitable for pools up to 6,000 gallons / 18ft diameter
• Uses widely available Type A cartridges (8" x 4.25")
• Double-insulated motor for safety
• Built-in air release valve makes priming easy
• 32mm (1.25") push-on hose connectors
• Quiet running, low energy use
• No tools needed to install

Pool size guide

This pump is rated for above-ground pools from 6ft up to 18ft in diameter, including:

• 6ft, 8ft, 10ft, 12ft, 15ft and 18ft Intex Easy Set and Metal Frame pools
• Bestway round pools with 32mm push-on connectors
• Any compatible above-ground pool up to 6,000 gallons

Why buy the genuine Intex

Cheap copies tend to leak around the hose fittings and burn out within a season. This is the real Intex C1000, the same unit that ships in Intex's bigger pool kits, so it's a straight replacement if your original pump has packed up. Cartridges, hoses and seals are all standard sizes you can pick up anywhere.

Operating tips

• Replace the Type A cartridge every 2-3 weeks of heavy use, or rinse and reuse for a few cycles between changes
• Run the pump for 6-8 hours a day for a typical garden pool
• Pair with a pool cover when not in use to keep debris out and cartridges lasting longer

In stock, dispatched from our UK warehouse, full UK warranty.