CLEARANCE: Premier Blue Vinyl Repair Patches - Self-Adhesive Patches for Pools, Spas & Inflatables (French Label) - £5 for 50 or £10 for 100

⚠ Clearance — instructions printed in French. The patches themselves are identical to our standard listing in size, material and adhesive — the supplier just sent this batch with a French-language label by mistake. Full English instructions are below, and we've passed the saving on as 10p per patch.

Bulk pack of self-adhesive vinyl repair patches – just 10p per patch.

These are exactly the same heavy-duty self-adhesive vinyl repair patches we sell in our standard listing. The only difference: a small batch arrived from the supplier with the printed instructions on the label in French instead of English. The patches themselves are identical in size, material and performance, so we're passing the saving on to you.

Perfect for repairing punctures and small tears in inflatable swimming pools, hot tubs, spas, airbeds, lilos, dinghies and other inflatable toys.

• Heavy-duty self-adhesive vinyl repair patches
• Each patch measures 68mm x 68mm
• Just peel and stick – no glue required
• Works above or below the water line
• Ideal for inflatable pools, spas, hot tubs, airbeds, lilos and pool toys
• Sold in bulk packs: 50 patches for £5 or 100 patches for £10 – that's just 10p per patch
• Label printed in French – instructions in English provided below

How to use (English instructions)

1. Make sure the area to be repaired is completely clean and dry.
2. Cut a piece of patch around 20mm larger than the hole. Round off the corners (this stops them lifting later).
3. Peel the paper backing off the patch.
4. Place the patch centred over the hole and press down firmly. Smooth out any air bubbles or water from the centre outwards.
5. Leave for at least 30 minutes before re-inflating or using. The bond strengthens over the next few hours.

Tip: For underwater repairs, follow the same steps and apply firm pressure to squeeze out all water and air bubbles.

What's printed on the label (for reference)

PIÈCE DE RÉPARATION EN VINYLE – DIRECTIVES D'EMPLOI
1. S'assurer que la surface à réparer est propre.
2. Coupez une pièce 20 mm plus large que le trou à réparer. Arrondir les coins.
3. Séparez le support de papier du vinyle.
4. Placez la pièce centrée sur le trou, pressez fermement. Pressez les bulles d'air et l'eau vers l'extérieur de la pièce.
5. Laissez reposer 30 minutes. Le temps augmente l'emprise du collage.