Flotide Heat Pump Hose Adaptor Pair (x2) — 1.5" to 2" Thread
Pair of Hose Adaptors for Flotide Heat Pumps
2 adaptors included — one for the inlet, one for the outlet. Everything you need to connect your Flotide heat pump to standard 2" (50mm) nut-type threaded pool hoses.
These screw directly into the inlet and outlet ports of any Flotide S, A, X, or SX range heat pump, converting the G1-1/2" (1.5") threaded connections to accept 2" threaded hose fittings.
🎯 You Need These If
- You have a Flotide S5, S7, S10, A5, A7, A10, X11, X14 or any SX model
- Your pool uses 2" (50mm) threaded nut-type hoses (typically used with sand filter systems)
- You want a watertight, secure threaded connection
🔧 How It Works
- Screw one adaptor into your heat pump's inlet port and one into the outlet port (1.5" male thread)
- Use PTFE tape on the threads for a watertight seal
- Connect your 2" threaded hoses to each adaptor
- Done — you're plumbed in!
🔗 Not Sure Which Adaptor You Need?
| This adaptor (2" Threaded) | For 2" (50mm) nut-type threaded hoses — typically used with sand filter systems. Screws on with a threaded nut fitting. |
| 32/38mm Push-Fit Hose Tail Pair | For 32mm or 38mm push-fit hoses (the smooth hoses that come with most above-ground pools). Push on and secure with a jubilee clip. |
Only need one? Buy a single 2" threaded adaptor here.
🛡️ Specifications
| Quantity | 2 (pair — inlet & outlet) |
| Heat Pump Side | G1-1/2" (1.5") male thread |
| Hose Side | 2" (50mm) female thread (accepts nut-type hose fittings) |
| Material | PVC-U |
| Pressure Rating | 10 bar |
| Colour | Grey |
| Compatible Heat Pumps | All Flotide S, A, X, and SX range models |
🚚 Free UK Mainland Delivery • 💬 Expert Advice Available
Recommended for You
Your Product Browsing History
Best Sellers
- Choosing a selection results in a full page refresh.