Flotide Heat Pump Hose Tail Adaptor — 1.5" to 32/38mm Push Fit

Connect Push-Fit Pool Hoses to Your Heat Pump

This adaptor screws directly into the inlet or outlet port of any Flotide S, A, X, or SX range heat pump (and most other pool heat pumps with G1-1/2" ports), giving you a stepped hose tail that accepts standard 32mm or 38mm push-fit pool hoses.

In plain English: Your heat pump has a 1.5" threaded port. This adaptor screws in and gives you a barbed hose tail — just push your standard pool hose on and secure with a jubilee clip. No threading, no special fittings needed.

🎯 You Need This If

• You have a Flotide S5, S7, S10, A5, A7, A10, X11, X14 or any heat pump with 1.5" threaded ports
• Your pool uses 32mm or 38mm push-fit hoses (the standard hoses that come with Intex, Bestway, and most above-ground pools)
• You want a simple, secure push-on connection without threaded hose fittings

🔧 How It Works

1. Screw the adaptor into your heat pump's inlet or outlet port (1.5" male thread)
2. Use PTFE tape on the thread for a watertight seal
3. Push your 32mm or 38mm hose onto the stepped hose tail
4. Secure with a jubilee clip (hose clamp) for a leak-free connection
5. Repeat for both inlet and outlet (you'll need 2 adaptors per heat pump)

🔗 Which Adaptor Do I Need?

⚠️ How Many Do I Need?

You need 2 adaptors per heat pump — one for the water inlet and one for the water outlet. Add 2 to your basket!

🛡️ Specifications

🚚 Free UK Mainland Delivery • 💬 Expert Advice Available