Flotide Heat Pump Hose Tail Adaptor Pair (x2) — 1.5" to 32/38mm Push Fit

Pair of Hose Tail Adaptors for Flotide Heat Pumps

2 adaptors included — one for the inlet, one for the outlet. Everything you need to connect your Flotide heat pump to standard 32mm or 38mm push-fit pool hoses.

These screw directly into the inlet and outlet ports of any Flotide S, A, X, or SX range heat pump (and most other heat pumps with G1-1/2" ports), giving you a stepped hose tail that accepts standard push-fit pool hoses.

🎯 You Need These If

• You have a Flotide S5, S7, S10, A5, A7, A10, X11, X14 or any heat pump with 1.5" threaded ports
• Your pool uses 32mm or 38mm push-fit hoses (the smooth hoses that come with Intex, Bestway, and most above-ground pools)
• You want a simple, secure push-on connection

🔧 How It Works

1. Screw one adaptor into your heat pump's inlet port and one into the outlet port (1.5" male thread)
2. Use PTFE tape on the threads for a watertight seal
3. Push your 32mm or 38mm hose onto each stepped hose tail
4. Secure with jubilee clips (hose clamps) for a leak-free connection
5. Done — you're plumbed in!

🔗 Not Sure Which Adaptor You Need?

Only need one? Buy a single 32/38mm hose tail adaptor here.

🛡️ Specifications

🚚 Free UK Mainland Delivery • 💬 Expert Advice Available